07-02-2025 | Tuningfile | Stage 1 ready for the Porsche 911 3.0T Carrera GTSWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Porsche 911 3.0T Carrera GTS with 480hp!
********************
Capacity: 2981cc
Bore x stroke: 91.0 x 76.4 (mm)
Compression ratio: 10.2 (:1)
Power approx: 480hp
Power output: 540hp
Torque approx: 570nm
Torque output: 690nm
ECU: Bosch MG1CP007
Read Method: B-Flash BENCH / OBD |
29-01-2025 | Tuningfile | Stage 1 ready for the Iveco Daily 120 2.3 (EUR6)We are proud to announce that ChiptuningFile-Service.com has improved stage 1 software for the Iveco Daily 120 2.3 (EUR6) with 116hp!
********************
Capacity: 2287cc
Bore x stroke: 88.0 x 94.0 (mm)
Power approx: 116hp
Power output: 190hp
Torque approx: 320nm
Torque output: 420nm
ECU: Bosch EDC17C49
Read Method: Autotuner Bench |
24-01-2025 | Tuningfile | Stage 2 ready for the BMW M8 4.4 Bi-Turbo V8 CompetitionWe are proud to announce that ChiptuningFile-Service.com has developed stage 2 software for the BMW M8 4.4 Bi-Turbo V8 Competition with 625hp!
********************
Capacity: 4395cc
Bore x stroke: 89.0 x 88.3 (mm)
Compression ratio: 10.0 (:1)
Power approx: 625hp
Power output: 725hp
Torque approx: 750nm
Torque output: 1030nm
ECU: Bosch MG1CS201
Read Method: Autotuner Bench |
12-12-2024 | Tuningfile | Stage 1 ready for the Mercedes-Benz Sprinter 319 CDIWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Mercedes-Benz Sprinter 319 CDI with 190hp!
********************
Capacity: 1950cc
Bore x stroke: 82.0 x 93.2 (mm)
Compression ratio: 15.5 (:1)
Power approx: 190hp
Power output: 220hp
Torque approx: 440nm
Torque output: 500nm
ECU: Bosch MD1CP001
Tool: bFlash
Extra information: It is only possible to remap this car when the ECU is sent to bFlash! |
06-12-2024 | Tuningfile | Stage 1 ready for the Opel Grandland X 1.6 TurboWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Opel Grandland X 1.6 Turbo with 180hp!
********************
Capacity: 1598cc
Bore x stroke: 79.0 x 81.5 (mm)
Compression ratio: 10.2 (:1)
Power approx: 180hp
Power output: 205hp
Torque approx: 250nm
Torque output: 325nm
ECU: Bosch MG1CS042
Read Method: Autotuner Bench |
04-11-2024 | Tuningfile | Stage 1 ready for the Mercedes-Benz SprinterWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Mercedes Sprinter 315 CDI with 150hp!
********************
Capacity: 1950cc
Bore x stroke: 82.0 x 92.3 (mm)
Compression ratio: 15.5 (:1)
Power approx: 150hp
Power output: 190hp
Torque approx: 330nm
Torque output: 430nm
ECU: Bosch MD1CP001
Tool: bFlash ( After Unlock ) |
18-10-2024 | Tuningfile | Stage 1 ready for the Mini Cooper 1.5TWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Mini Cooper 1.5T with 136hp!
********************
Capacity: 1499cc
Bore x stroke: 82.0 x 94.6 (mm)
Compression ratio: 11.0 (:1)
Power approx: 136hp
Power output: 175hp
Torque approx: 220nm
Torque output: 300nm
ECU: Bosch MG1CS201
Tool: FEMTO OBD ( After Unlock by FEMTO ) |
28-09-2024 | Tuningfile | Stage 1 ready for the Hyundai i30 1.5 T-GDiWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Hyundai i30 1.5 T-GDi with 160hp!
********************
Capacity: 1482cc
Bore x stroke: 71.6 x 92.0 (mm)
Compression ratio: 10.5 (:1)
Power approx: 160hp
Power output: 195hp
Torque approx: 253nm
Torque output: 315nm
ECU: Kefico CPEGD3.20.1
Tool: Flex Bench |
27-09-2024 | Tuningfile | Stage 2 ready for the BMW 540iWe are proud to announce that ChiptuningFile-Service.com has developed stage 2 software for the BMW 540i with 333hp!
********************
Capacity: 2998cc
Bore x stroke: 82.0 x 94.6 (mm)
Compression ratio: 11.0 (:1)
Power approx: 333hp
Power output stage I: 420hp
Power output stage II: 450hp
Torque approx: 400nm
Torque output stage I: 600nm
Torque output stage II: 640nm
ECU: Bosch MG1CS201
Tool: FEMTO OBD ( After Unlock by FEMTO ) |
04-09-2024 | Tuningfile | Stage 1 ready for the Dacia Sandero TCe 90We are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Dacia Sandero TCe with 90hp!
********************
Capacity: 999cc
Bore x stroke: 72.2 x 81.3 (mm)
Compression ratio: 10.5 (:1)
Power approx: 90hp
Power output: 110hp
Torque approx: 160nm
Torque output: 210nm
ECU: Siemens/Continental EMS3141
Read Method: Autotuner OBD / Bench |
30-08-2024 | Tuningfile | Stage 1 ready for the Dacia Duster 1.3 TCeWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Dacia Duster 1.3 TCe with 150hp!
********************
Capacity: 1332cc
Bore x stroke: 72.2 x 81.4 (mm)
Compression ratio: 10.5 (:1)
Power approx: 150hp
Power output: 165hp
Torque approx: 250nm
Torque output: 300nm
ECU: Siemens/Continental EMS3161
Read Method: Autotuner OBD / Bench |
17-07-2024 | Tuningfile | Stage 1 ready for the Ford Transit ConnectWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Ford Transit Connect 1.5 TDCi with 100hp!
********************
Capacity: 1499cc
Bore x stroke: 73.5 x 88.3 (mm)
Compression ratio: 16.0 (:1)
Power approx: 100hp
Power output: 145hp
Torque approx: 250nm
Torque output: 320nm
ECU: Bosch MD1CS005
Tool: Autotuner Bench |
10-07-2024 | Tuningfile | Stage 2 ready for the Maserati Levante 3.8 V8 Bi-Turbo TrofeoWe are proud to announce that ChiptuningFile-Service.com has developed stage 2 software for the Maserati Levante 3.8 V8 Bi-Turbo Trofeo with 590hp!
********************
Capacity: 3799cc
Bore x stroke: 86.5 x 80.8 (mm)
Compression ratio: 9.4 (:1)
Power approx: 590hp
Power output: 650hp
Torque approx: 730nm
Torque output: 900nm
ECU: Bosch MED17.6.9
Tool: Autotuner Bench |
02-07-2024 | Tuningfile | Stage 2 ready for the BMW M4 CompetitionWe are proud to announce that ChiptuningFile-Service.com has developed stage 2 software for the BMW M4 Competition with 510hp!
********************
Capacity: 2998cc
Bore x stroke: 82.0 x 94.6 (mm)
Compression ratio: 11.0 (:1)
Power approx: 510hp
Power output octane 98: 675hp
Power output octane 102: 700hp
Torque approx: 650nm
Torque output octane 98: 870nm
Torque output octane 102: 900nm
ECU: Bosch MG1CS049
Tool: FEMTO OBD
Extra information: It is only possible to remap this car when the ECU is programmed by FEMTO! |
27-06-2024 | Tuningfile | Stage 1 ready for the Opel Vivaro 2.0dWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Opel Vivaro 2.0d with 150hp!
********************
Capacity: 1997cc
Bore x stroke: 85.0 x 88.0 (mm)
Compression ratio: 16.0 (:1)
Power approx: 150hp
Power output: 200hp
Torque approx: 370nm
Torque output: 450nm
ECU: Delphi DCM7.1A
Tool: Autotuner OBD |
04-06-2024 | Tuningfile | Stage 1 ready for the Ford F-150 3.5T EcoboostWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Ford F-150 3.5T Ecoboost with 375hp!
********************
Capacity: 3514cc
Bore x stroke: 92.4 x 87.6 (mm)
Compression ratio: 10.5 (:1)
Power approx: 375hp
Power output: 400hp
Torque approx: 637nm
Torque output: 740nm
ECU: Bosch MEDG17.0
Read Method: Autotuner OBD / Bench |
29-05-2024 | Tuningfile | Stage 1 ready for the Nissan Micra 0.9 TCEWe are proud to announce that ChiptuningFile-service.com has developed stage 1 software for the Nissan Micra 0.9 TCE with 90hp!
********************
Capacity: 898cc
Bore x stroke: 72.2 x 73.1 (mm)
Compression ratio: 9.5 (:1)
Power approx: 90hp
Power output: 110hp
Torque approx: 140nm
Torque output: 190nm
ECU: Siemens / Continental EMS3125
Read Method: Autotuner OBD |
23-05-2024 | Tuningfile | Stage 1 ready for the Renault Master 2.3 DCiWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Renault Master 2.3 DCi with 135hp!
********************
Capacity: 2298cc
Bore x stroke: 85.0 x 101.3 (mm)
Compression ratio: 15.4 (:1)
Power approx: 135hp
Power output: 210hp
Torque approx: 360nm
Torque output: 480nm
ECU: Siemens / Continental SID321
Read Method: Autotuner OBD
Extra information: There are a lot of differences in software versions of this engine type. We developed software version 237107756S. We're currently working hard to develop more software versions of this engine type. |
16-05-2024 | Tuningfile | Stage 1 ready for the Citroën Jumper 2.2 BlueHDIWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Citroën Jumper 2.2 BlueHDI with 140hp!
********************
Capacity: 2179cc
Bore x stroke: 85.0 x 96.0 (mm)
Compression ratio: 16.0 (:1)
Power approx: 140hp
Power output: 200hp
Torque approx: 340nm
Torque output: 430nm
ECU: Delphi DCM7.1B
Read Method: Autotuner OBD |
25-04-2024 | Tuningfile | Stage 1 ready for the Nissan Micra 1.0 DIG-TWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Nissan Micra 1.0 DIG-T with 100hp!
********************
Capacity: 999cc
Bore x stroke: 72.2 x 81.3 (mm)
Compression ratio: 9.5 (:1)
Power approx: 100hp
Power output: 115hp
Torque approx: 160nm
Torque output: 200nm
ECU: Siemens/Continental EMS3140
Read Method: Autotuner OBD |
19-04-2024 | Tuningfile | Stage 1 ready for Fiat Talento 2.0 EcojetWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Fiat Talento 2.0 Ecojet with 170hp!
********************
Capacity: 1997cc
Bore x stroke: 85.0 x 88.0 (mm)
Compression ratio: 16.7 (:1)
Power approx: 170hp
Power output: 200hp
Torque approx: 380nm
Torque output: 430nm
ECU: Bosch MD1CS006
Read Method: Autotuner Bench |
10-04-2024 | Tuningfile | Stage 1 ready for the Renault Megane 1.3 TCeWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Renault Megane 1.3 TCe with 160hp! We have stage 1 files ready for all versions of the 1.3 TCe engine with the same results!
********************
Capacity: 1330cc
Bore x stroke: 72.2 x 81.2 (mm)
Compression ratio: 10.5 (:1)
Power approx: 160hp
Power output: 175hp
Torque approx: 260nm
Torque output: 310nm
ECU: Siemens/Continental EMS3160
Read Method: bFlash OBD |
21-03-2024 | Tuningfile | Stage 2 ready for the Porsche Macan 2.9 GTSWe are proud to announce that ChiptuningFiles-service.com has developed stage 2 software for the Porsche Macan 2.9 GTS with 380hp!
********************
Capacity: 2894cc
Bore x stroke: 84.5 x 86.0 (mm)
Compression ratio: 10.5 (:1)
Power approx: 380hp
Power output: 510hp
Torque approx: 520nm
Torque output: 775nm
ECU: Bosch MG1CS002
Read Method: Autotuner BENCH & OBD for programming
Extra information: ZF DL501 TCU tuning is required |
27-02-2024 | Tuningfile | Stage 1 ready for the Audi RSQ8 4.0 Bi-Turbo V8We are proud to announce that ChiptuningFiles-service.com has developed stage 1 software for the Audi RSQ8 4.0 Bi-Turbo V8 with 600hp!
********************
Capacity: 3996cc
Bore x stroke: 86.0 x 86.0 (mm)
Compression ratio: 10.0 (:1)
Power approx: 600hp
Power output: 720hp
Torque approx: 800nm
Torque output: 975nm
ECU: Bosch MG1CS008
Read Methods: Autotuner Bench & OBD |
22-02-2024 | Tuningfile | Stage 2 ready for the Audi RS6 4.0 Bi-Turbo V8We are proud to announce that ChiptuningFiles-Service.com has developed stage 2 software for the Audi RS6 4.0 Bi-Turbo V8 with 600hp!
********************
Capacity: 3996cc
Bore x stroke: 86.0 x 86.0 (mm)
Compression ratio: 10.0 (:1)
Power approx: 600hp
Power output: 805hp
Torque approx: 800nm
Torque output: 1140nm
ECU: Bosch MG1CS008
Read Method: Autotuner OBD
Modifications: OPF off + Decat off, Eventuri Intake & Akrapovic muffler |
15-02-2024 | Tuningfile | Stage 1 ready for the Ford F150 3.5T EcoboostWe are proud to announce that ChiptuningFiles-Service.com has developed stage 1 software for the Ford F150 3.5T Ecoboost with 400hp!
********************
Capacity: 3497cc
Bore x stroke: 92.5 x 86.6 (mm)
Compression ratio: 10.5 (:1)
Power approx: 400hp
Power output: 450hp
Torque approx: 680nm
Torque output: 745nm
ECU: Bosch MG1CS036
Read Method: Autotuner Bench |
30-01-2024 | Tuningfile | Stage 1 ready for the Audi A8 60 TFSI-eWe are proud to announce that ChiptuningFiles-Service.com has developed stage 1 software for the Audi A8 60 TFSI-e with 456hp!
********************
Capacity: 2995cc
Bore x stroke: 84.5 x 89.0 (mm)
Compression ratio: 11.2 (:1)
Power approx: 456hp
Power output: 530hp
Torque approx: 700nm
Torque output: 850nm
ECU: Bosch MG1CS002
Read Method: Autotuner OBD |
24-01-2024 | Tuningfile | Stage 1 ready for the Land Rover Evoque 2.0 TD4We are proud to announce that ChiptuningFiles-service.com has developed stage 1 software for the Land Rover Evoque 2.0 TD4 with 180hp!
********************
Capacity: 1998cc
Bore x stroke: 83.0 x 92.4 (mm)
Compression ratio: 15.5 (:1)
Power approx: 180hp
Power output: 205hp
Torque approx: 430nm
Torque output: 475nm
ECU: Bosch MEDC17.9
Read Method: CMD OBD |
10-01-2024 | Tuningfile | Stage 1 ready for the Audi A4 35 TFSIWe are proud to announce that ChiptuningFiles-Service.com has developed stage 1 software for the Audi A4 35 TFSi with 150hp!
********************
Capacity: 1984cc
Bore x stroke: 82.5 x 92.8 (mm)
Compression ratio: 10.5 (:1)
Power approx: 150hp
Power output: 245hp
Torque approx: 270nm
Torque output: 420nm
ECU: Bosch MG1CS001
Read Method: Autotuner OBD |
20-12-2023 | Tuningfile | Stage 1 ready for the BMW M850iWe are proud to announce that ChiptuningFiles-Service.com has developed stage 1 software for the BMW M850i with 530hp!
********************
Capacity: 4395cc
Bore x stroke: 89.0 x 88.3 (mm)
Compression ratio: 10.5 (:1)
Power approx: 530hp
Power output: 660hp
Torque approx: 750nm
Torque output: 880nm
ECU: Bosch MG1CS201
Read Method: Autotuner BENCH (Unlocking)
Autotuner OBD (Programming) |
18-12-2023 | Tuningfile | Stage 1 ready for the Mercedes-Benz GLE 63 AMG SWe are proud to announce that ChiptuningFiles-Service.com has developed stage 1 software for the Mercedes-Benz GLE 63 AMG S with 585hp!
********************
Capacity: 5461cc
Bore x stroke: 98.0 x 90.5 (mm)
Compression ratio: 10.0 (:1)
Power approx: 585hp
Power output: 660hp
Torque approx: 760nm
Torque output: 1050nm
ECU: Bosch MED17.7.3
Read Method: Autotuner OBD |
11-12-2023 | Tuningfile | Stage 1 ready for the Alfa Romeo Giulia 2.2 JTDWe are proud to announce that ChiptuningFiles-Service.com has developed stage 1 software for the Alfa Romeo Giulia 2.2 JTD with 160hp!
********************
Capacity: 2143cc
Bore x stroke: 83.0 x 99.0 (mm)
Compression ratio: 15.5 (:1)
Power approx: 160hp
Power output: 220hp
Torque approx: 450nm
Torque output: 530nm
ECU: Bosch EDC17C69
Read Method: Autotuner Bench |
01-12-2023 | Tuningfile | Stage 1 ready for the Mazda CX-30 2.0 SkyActiv-GWe are proud to announce that ChiptuningFiles-Service.com has developed stage 1 software for the Mazda CX-30 2.0 SkyActiv-G with 122hp!
********************
Capacity: 1998cc
Bore x stroke: 83.5 x 91.2 (mm)
Compression ratio: 13.0 (:1)
Power approx: 122hp
Power output: 165hp
Torque approx: 213nm
Torque output: 225nm
ECU: Denso Pxxx
Read method: CMD OBD |
28-11-2023 | Tuningfile | STAGE 2 READY FOR THE MERCEDES-BENZ E63 AMG SWe are proud to announce that ChiptuningFile-Service.com has developed stage 2 software for the Mercedes-Benz E63 AMG with 612hp!
********************
Capacity: 3982cc
Bore x stroke: 83.0 x 92.0 (mm)
Compression ratio: 8.6 (:1)
Power approx: 612hp
Power output: 778hp
Torque approx: 900nm
Torque output: 1184nm
ECU: Bosch MED17.7.5 |
21-11-2023 | Tuningfile | STAGE 1 READY FOR THE FORD FIESTA 1.0T ECOBOOSTWe are proud to announce that ChiptuningFile-service.com has developed stage 1 software for the Ford Fiesta 1.0T Ecoboost with 95hp!
********************
Capacity: 999cc
Bore x stroke: 71.9 x 82.0 (mm)
Compression ratio: 10.5 (:1)
Power approx: 95hp
Power output: 130hp
Torque approx: 170nm
Torque output: 230nm
ECU: Bosch MG1CS016 |
25-10-2023 | Tuningfile | STAGE 1 READY FOR THE FORD KUGA 1.5T ECOBOOSTWe are proud to announce that ChiptuningFile-service.com has developed stage 1 software for the Ford Kuga 1.5T Ecoboost with 120hp!!
********************
Capacity: 1498cc
Bore x stroke: 79.0 x 76.4 (mm)
Compression ratio: 10.0 (:1)
Power approx: 120hp
Power output: 190hp
Torque approx: 240nm
Torque output: 330nm
ECU: Siemens/Continental EMS2510 / EMS2511 / EMS2513 |
02-10-2023 | Tuningfile | STAGE 1 READY FOR THE MERCEDES-BENZ C160We are proud to announce that ChiptuningFiles-Service.com has developed stage 1 software for the Mercedes-Benz C160 with 129hp!
********************
Capacity: 1497cc
Bore x stroke: 80.4 x 73.7 (mm)
Compression ratio: 10.5 (:1)
Power approx: 129hp
Power output: 175hp
Torque approx: 210nm
Torque output: 295nm
ECU: Bosch MED17.7.7 |
28-09-2023 | Tuningfile | STAGE 1 READY FOR THE KIA PROCEED GT 1.6 T-GDIWe are proud to announce that ChiptuningFiles-Service.com has developed stage 1 software for the Kia Proceed GT 1.6 T-GDI with 204hp!
********************
Capacity: 1591cc
Bore x stroke: 77.0 x 85.4 (mm)
Compression ratio: 9.50 (:1)
Power approx: 204hp
Power output: 235hp
Torque approx: 265nm
Torque output: 340nm
ECU: Kefico CPEGD2.20.3 |
31-08-2023 | Tuningfile | STAGE 1 READY FOR THE AUDI A4 45 TFSI WITH 265HP!We are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Audi A4 45 TFSI with 265hp!
Power approx: 265hp
Power output: 320hp
Torque approx: 370nm
Torque output: 440nm |
28-07-2023 | Tuningfile | STAGE 1 READY FOR THE MERCEDES VITO 116 CDIWe are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Mercedes-Benz Vito 116 CDI with 163hp!
Power approx: 163hp
Power output: 195hp
Torque approx: 370nm
Torque output: 435nm |
25-07-2023 | Tuningfile | STAGE 1 READY FOR THE MINI COUNTRYMAN SE HYBRID ALL4We are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Mini Countryman Hybrid ALL4 with 224hp!
Power approx: 224hp
Power output: 275hp
Torque approx: 358nm
Torque output: 450nm |
21-07-2023 | Tuningfile | STAGE 1 READY FOR THE AUDI SQ5 3.0 TFSIWe are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Audi SQ5 3.0 TFSI with 354hp!
Power approx: 354hp
Power output: 405hp
Torque approx: 500nm
Torque output: 610nm |
01-07-2023 | Tuningfile | STAGE 1 READY FOR THE PORSCHE 911 TURBO SWe are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Porsche 911 Turbo S with 650hp!
Power approx: 650hp
Power output: 740hp
Torque approx: 800nm
Torque output: 850nm |
25-05-2023 | Tuningfile | STAGE 1 READY FOR THE LAND ROVER DISCOVERY 2.0 SD4We are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Land Rover Discovery 2.0 SD4 with 240hp!
Power approx: 240hp
Power output: 280hp
Torque approx: 500nm
Torque output: 550nm |
20-05-2023 | Tuningfile | STAGE 1 READY FOR THE FORD EXPLORER 2.3 ECOBOOSTWe are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Ford Explorer 2.3 Ecoboost with 280hp!
Power approx: 280hp
Power output: 295hp
Torque approx: 420nm
Torque output: 480nm |
17-05-2023 | Tuningfile | STAGE 1 READY FOR THE VOLKSWAGEN GOLF GTI CLUBSPORTWe are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Volkswagen Golf GTI Clubsport with 300hp!
Power approx: 300hp
Power output: 385hp
Torque approx: 400nm
Torque output: 510nm |
01-05-2023 | Tuningfile | STAGE 1 READY FOR THE KIA SPORTAGE 1.6 T GDIWe are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Kia Sportage 1.6 T GDI with 177hp!
Power approx: 177hp
Power output: 210hp
Torque approx: 265nm
Torque output: 340nm |
27-04-2023 | Tuningfile | STAGE 1 READY FOR THE VOLKSWAGEN GOLF 8 1.5 TSIWe are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Volkswagen Golf 8 1.5 TSi with 130hp.
Power approx: 130hp
Power output: 170hp
Torque approx: 200nm
Torque output: 275nm |
03-04-2023 | Tuningfile | STAGE 1 READY FOR THE TOYOTA AURIS 1.2TWe are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Toyota Auris 1.2T with 116hp!
Power approx: 116hp
Power output: 140hp
Torque approx: 185nm
Torque output: 225nm |
01-04-2023 | Tuningfile | STAGE 1 READY FOR THE BÜRSTNER BT6801We are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Bürstner BT6801 with 150hp 2.3 Multijet engine!Power approx: 150hp
Power output: 200hp
Torque approx: 380nm
Torque output: 460nm |
30-03-2023 | Tuningfile | STAGE 1 READY FOR THE MERCEDES-BENZ CLA 220We are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Mercedes-Benz CLA 220 with 190hp!Power approx: 190hp
Power output: 250hp
Torque approx: 300nm
Torque output: 400nm |
25-03-2023 | Tuningfile | STAGE 1 READY FOR THE ABARTH 595We are proud to announce that ChiptuningFiles.Com has developed stage 1 software for the Abarth 595 1.4 T-Jet with 180hp!Power approx: 180hp
Power output: 200hp
Torque approx: 250nm
Torque output: 320nm |
28-02-2023 | Tuningfile | STAGE 1 READY FOR THE VOLVO V40 1.5T T2We are proud to announce that ChiptuningFiles.Com has developed stage 1 software for the Volvo V40 1.5T T2 with 122hp!Power approx: 122hp
Power output: 190hp
Torque approx: 240nm
Torque output: 320nm |
28-02-2023 | Tuningfile | STAGE 1 READY FOR THE VOLKSWAGEN GOLF 8 GTDWe are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Volkswagen Golf 8 2.0 GTD with 200hp! Power approx: 200hp
Power output: 245hp
Torque approx: 400nm
Torque output: 480nm |
31-01-2023 | Tuningfile | STAGE 1 READY FOR THE OPEL INSIGNIA 1.5TWe are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Opel Insignia 1.5T with 165hp!Power approx: 145hp
Power output: 185hp
Torque approx: 245nm
Torque output: 294nm |
31-12-2022 | Tuningfile | STAGE 1 READY FOR THE FORD MUSTANG 2.3 ECOBOOSTWe are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Ford Mustang 2.3 Ecoboost with 317hp! Power approx: 280hp
Power output: 315hp
Torque approx: 430nm
Torque output: 518nm |
21-12-2022 | Tuningfile | STAGE 2 READY FOR THE ALFA ROMEO GIULIA QVWe are proud to announce that Chiptuning-Files.Com has developed stage 2 software for the Alfa Romeo Giulia QV with 510hp!
Power approx: 484hp
Power output: 558hp
Torque approx: 650nm
Torque output: 780nm |
21-12-2022 | Tuningfile | STAGE 1 READY FOR THE ALFA ROMEO GIULIA QVWe are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Alfa Romeo Giulia QV with 510hp!
Power approx: 474hp
Power output: 545hp
Torque approx: 600nm
Torque output: 710nm |
30-11-2022 | Tuningfile | STAGE 2 READY FOR THE VOLKSWAGEN GOLF 8 RWe are proud to announce that Chiptuning-Files.Com has developed stage 2 software for the Volkswagen Golf 8 R 2.0 TFSI with 420hp! Without OPF 460hp! Power approx: 363hp
Power output: 450hp
Torque approx: 483nm
Torque output: 590nm |
30-11-2022 | Tuningfile | STAGE 1 READY FOR THE VOLKSWAGEN GOLF 8 RWe are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Volkswagen Golf 8 R 2.0 TFSI with 420hp! Power approx: 320hp
Power output: 380hp
Torque approx: 420nm
Torque output: 500nm |
27-10-2022 | Tuningfile | STAGE 1 READY FOR THE MERCEDES-BENZ GT BLACK SERIESWe are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Mercedes-Benz AMG GT Black Series with 730hp!Power approx: 730hp
Power output: 790hp
Torque approx: 800nm
Torque output: 1040nm |
29-09-2022 | Tuningfile | STAGE 1 READY FOR THE VOLKSWAGEN GOLF 8 GTIWe are proud to announce that Chiptuning-Files.Com has developed stage 1 software for the Volkswagen Golf 8 GTI with 245hp!
Power approx: 245hp
Power output: 327hp
Torque approx: 370nm
Torque output: 470nm |
02-05-2022 | Tuningfile | STAGE 1 READY FOR THE KIA SPORTAGE 1.6 T-GDIWe are proud to announce that ChiptuningFiles.Com has developed stage 1 software for the Kia Sportage 1.6 T-GDI with 177hp!
Power approx: 177hp
Power output: 210hp
Torque approx: 265nm
Torque output: 340nm |
22-10-2021 | Tuningfile | Stage 1 ready for the BMW 540iWe are proud to announce that ChiptuningFiles-Service.Com has developed stage 1 software for the BMW 540i with 340hp! |
05-10-2021 | Tuningfile | Stage 1 ready for the BMW M550dWe are proud to announce that ChiptuningFiles-Service.Com has developed stage 1 software for the BMW M550d with 400hp! |
01-10-2021 | Tuningfile | Stage 1 ready for the Mercedes-Benz A220We are proud to announce that ChiptuningFiles-Service.Com has developed stage 1 software for the Mercedes-Benz A220 with 190hp! |
30-08-2021 | Tuningfile | Stage 1 ready for the Bentley Bentayga 6.0 W12 Bi-TurboWe are proud to announce that ChiptuningFiles-Service.Com has developed stage 1 software for the Bentley Bentayga 6.0 W12 Bi-Turbo with 608hp! |
20-07-2021 | Tuningfile | Stage 1 ready for the 2021 Porsche 911 3.8 Bi-Turbo SWe are proud to announce that ChiptuningFiles-Service.Com has developed stage 1 software for the 2021 Porsche 911 3.8 Bi-Turbo S with 650hp! |
19-07-2021 | Tuningfile | Stage 1 ready for the 2018 Mercedes-Benz CLS 350dWe are proud to announce that ChiptuningFiles-Service.Com has developed stage 1 software for the 2018 Mercedes-Benz CLS 350d with 286hp! |
16-07-2021 | Tuningfile | Stage 1 ready for the 2021 Porsche 911 Turbo S with 650hpWe are proud to announce that ChiptuningFiles-Service.Com has developed stage 1 software for the 2021 Porsche 911 3.8 Bi-Turbo S with 650hp! |
18-06-2021 | Tuningfile | Stage 1 ready for the 2020 Volkswagen Polo 1.0 TSIWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Volkswagen Polo 1.0 TSI! |
10-06-2021 | Tuningfile | Stage 1 ready for the Audi RS6 4.0 V8 Bi-TurboWe are proud to announce that ChiptuningFile-Servive.com has developed software for the Audi RS6 4.0 V8 Bi-Turbo! |
07-05-2021 | Tuningfile | Stage 1 ready for the Mercedes-Benz G63 AMGWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Mercedes-Benz G63 AMG with 585hp! |
12-04-2021 | Tuningfile | Stage 1 ready for the 2021 Mercedes-Benz Vito 110 CDIWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Mercedes-Benz Vito 110 CDI with 102hp! |
26-02-2021 | Tuningfile | Stage 1 ready for the 2021 Mercedes-Benz Vito 114 CDIWe are proud to announce that ChiptuningFiles-service.com has developed stage 1 software for the Mercedes-Benz Vito 114 CDI with 136hp! |
13-02-2021 | Tuningfile | Stage 1 ready for the 2021 Volkswagen Caddy 2.0 TDIWe are proud to announce that ChiptuningFile-Service.com has developed stage 1 software for the Volkswagen Caddy 2.0 TDI with the Bosch MD1CS004 ECU! |
29-01-2021 | Tuningfile | Stage 1 ready for the 2020 Audi A6 35 TDI with 163hpWe are proud to announce that Chiptuningfile-Service.com has developed software for the Audi A6 35 TDI with the Bosch MD1CS004 ECU! |
22-01-2021 | Tuningfile | Stage 1 ready for the 2017 Audi A5 3.0 TDI with 218hpStage 1 ready for the 2017 Audi A5 3.0 TDI with 218hp |
22-12-2020 | Tuningfile | Stage 3 ready for the 2017 Volkswagen Caddy 2.0 TDI with 150hp!We are proud to announce that ChiptuningFile-Service.com has developed stage 3 software for the Volkswagen Caddy 2.0 TDI with the Bosch EDC17C64 ECU! |
08-12-2020 | Tuningfile | Stage 1 ready for the 2020 Mercedes-Benz GLE 300d with 245hp!We are proud to announce that Chiptuningfile-Service.com has developed software for the Mercedes-Benz GLE 300d with the Bosch MD1CP001 ECU! |
10-11-2020 | Tuningfile | Stage 1 ready for the Lamborghini Urus 4.0 V8 Bi-TurboWe are proud to announce that ChiptuningFile-Service.com has developed software for the Lamborghini Urus with the Bosch MG1CS008 ECU! |
01-09-2020 | Tuningfile | Stage 1 ready for Audi RS6 4.0 V8 Bi-TurboWe are proud to announce that ChiptuningFile-Service.com has developed software for the Audi RS6 4.0 V8 Bi-Turbo with the Bosch MG1CS008 ECU! |
29-08-2020 | Tuningfile | Stage 1 ready for Porsche Cayenne Coupé 3.0T V6We are proud to announce that ChiptuningFile-Service.com has developed software for the Porsche Cayenne Coupé 3.0T V6 with the Bosch MG1CS002 ECU! |
08-08-2020 | Tuningfile | New tuning file ready: Mercedes-Benz A35 AMG 306hpWe are proud to announce that ChiptuningFile-Service.com has developed software for the Mercedes-Benz A35 AMG with the Bosch MED17.7.7 ECU! |
29-07-2020 | Tuningfile | Stage 1 ready for the Volvo XC90 2.0 T8We are proud to announce that ChiptuningFile-Service.com has developed software for the Volvo XC90 2.0 T8 with the Denso VEA ECU! |
19-06-2020 | Tuningfile | Stage 1 ready for the BMW 330e HybridWe are proud to announce that ChiptuningFile-Service.com has developed software for the BMW 330e Hybrid with the Bosch MG1CS201 ECU! |
28-04-2020 | Tuningfile | New tuning file ready: Audi RSQ8We are proud to announce that ChiptuningFile-Service.com has developed software for the Audi RSQ8 with the Bosch MG1CSP008 ECU! |
31-03-2020 | Tuningfile | New tuning file ready: Mercedes-Benz S-Class 350 D 286hpWe are proud to announce that ChiptuningFile-Service.com has developed software for the Mercedes-Benz S-Class 350 D 286hp with the Bosch MD1CP001 ECU! |
05-03-2020 | Tuningfile | Ford Focus 2.0 ST250hp Finally good Pop&Bang developedFord Focus 2.0 ST250hp Finally good Pop&Bang developed |
04-03-2020 | Tuningfile | New tuning file ready: Porsche Panamera Sport Turismo S E-Hybrid 680hpWe are proud to announce that ChiptuningFile-Service.com has developed software for the Porsche Panamera Sport Turismo S E-Hybrid 680hp with the Bosch MG1CS008 ECU! |
11-02-2020 | Tuningfile | New tuning file ready: Mercedes-Benz AMG GT 4-door Coupé 53 435hpWe are proud to announce that ChiptuningFile-Service.com has developed software for the Mercedes-Benz AMG GT 4-door Coupé 53 435hp with the Bosch MG1CP002 ECU! |
10-02-2020 | Tuningfile | Porsche Panamera 2.9T Hybride 462hp @ 620hp&800nmFinally done after many test work, with a perfect EGT and very safe boost level. |
10-02-2020 | Tuningfile | New tuning file ready: Audi A4 35 TDI 163hpWe are proud to announce that ChiptuningFile-Service.com has developed software for the Audi A4 35 TDI 163hp! |
02-02-2020 | Tuningfile | Stage 1 ready for the Ford Focus 1.0T EcooboostWe are proud to announce that ChiptuningFile-Service.com has developed software for the Ford Focus 1.0T Ecoboost with the Bosch MG1CS008 ECU! |
19-12-2019 | Tuningfile | NEWSDear customer, we are closed on the 25th and 26nd of December and the 1st of January. The 31st of December we close at 12:00 CET. Merry Christmas and a happy new year, Team ChiptuningFile-Service.com |
12-04-2019 | Tuningfile | Updated files for Golf GTE Audi E-tronWe tuned this engine to 280ps&480nm (without DSG/S-Tronic limiter 310ps) |
27-03-2019 | Tuningfile | Bmw mg1 Pop&Bang now ready!We validated the Pop&Bang allready on the 550i/530i/140i |
21-02-2019 | Tuningfile | Ford Fiesta/Focus 1.0 Ecoboost MG1CS016We have finished the development of the new Ford 1.0 Ecoboost MG1CS016. |
03-02-2019 | Tuningfile | Merceds A200 & A250 MED17.7.7Mercedes A200 & A250 MED17.7.7 tuningfiles ready! |
04-12-2018 | Tuningfile | Saab 9-5 2.0T Delco rev version 280hp/420nm |